Introduction of Sunkye R013 Micro Strip Connector Equivalent to Airborn M series buckle connector Twist pin contacts, high density interconnection With locking buckle, connector can be locked and separate quickly and avoid mis-operation Meet MIL-C-83513 standard, light weight connectors are suitable for harsh environment application.
IP68 waterproof power cable connector meets with International Protection Marking, IEC standard 60529. Against test duration: 30 seconds in each of 4 angles (2 minutes total) and Water volume: 14–16 liters per minute. Working Environment, Pressure: 8–10 MPa (80–100 bar) at a distance of 0.10–0.15 m Water temperature: 80 °C. Underwater approve.
Power spectrum density 0.4G²/Hz, root mean square value of total acceleration 23.1G
Shock
735m/s² 11sm
Rated current
3A
Contact resistance
≤10mW
Insulation resistance
≥5000MW
Dielectric strength
800V
Durability
500 times
The judgment standard for sealing performance of waterproof connector for automotive is what we call IP waterproof grade standard. The latter two XX of ipxx refer to two numbers, the first X refers to the number 0 to 6, with the highest level of 6; the second X refers to the number 0 to 8, with the highest level of 8. Therefore, the highest waterproof level of waterproof connector is IP68. There are different standards for different IP waterproof grades, especially for IP68 waterproof grade test. Its test equipment, test conditions and test time should be recognized by both parties. The ip68 waterproof power cable connectors provided by Sunkye are ip68 rated connectors, that are definitely underwater approved, which can be a good choice for you.
As one of military connector manufacturers, we can offer kinds of related products for sale, if you are interested, please leave us a message.
Sunkye produced head connectors has dual high pressure 138Mpa (20,000PSI) benefit with glass sintered sealing (the air leakage rate: 1×10-3Pa.CM³ /s) technical, support environment temperature -60°C-200°C (harshness especial reach to 260°C max) against API-67 standard requested.
Perforation Gun, A device used to perforate oil and gas wells in preparation for production. Containing several shaped explosive charges, perforating guns are available in a range of sizes and configurations. The diameter of the gun used is typically determined by the presence of wellbore restrictions or limitations imposed by the surface equipment.
Sunkye Firing Head Connector for Perforating Gun Equipment in Downhole & Offshore Application-2
Perforation is an extremely important technique in petroleum exploration and recovery engineering, a major means of enhancing the recovery factor of gas and oil wells and also a typical method of tapping the potential of existing oil fields and increasing output.
Perforation completion is widely used worldwide and accounts for about over 90% of all well completions. Almost all reservoir beds can be opened by this method. In the method, in the course of gas and oil field exploitation the production casing is lowered and cemented and then special perforation instrument and devices are sent down to the predetermined depth and aimed at the target layer.
Through the key parts, the firing head connector
Sunkye Firing Head Connector for Perforating Gun Equipment in Downhole &
The perforator down in the well is ignited from the ground and the lined cavity charge (The propellant material is potassium perchlorate, an oxidizer that burns rapidly, creating CO2. As the shaped charges detonate, the propellant is ignited by extreme heat from the gun system. As it burns, the propellant generates CO2 at high peak pressures typically well above the formation fracture gradient.) is ignited which result in the detonation wave to transmit forward at a velocity of 7~8 km per second and high temperature and high-pressure shock waves are generated which penetrate through the casing, cement sheath and enter the stratum forming a hole canal, as illustrated by the diagram. Whichever perforation method you use, the performance and quality of the perforating gun (Including the perforating gun pipe) shall have a significant influence on the perforation quality of gas and oil wells.
PRESSURE FIRING HEAD CONNECTOR SPECIFICATIONS
Firing Head Connector Part Number
SK19.SYD.001
SK19.SYD.002
O.D. [mm]
28±0.01
28±0.05
Pin connector Length mm
65+0.1
41±0.05
Max. 100 Hour Temperature Rating[oC]†
200
200
Min. Required Pinning Pressure (psi)[MPa]
1,800psi/12MPa
1,800psi/12MPa
Max. Operating Pressure (psi)[MPa]‡
20,000psi/138MPa
20,000psi/138MPa
Air Leakage Rate
1×10-3 Pa.CM3 /s
1×10-3 Pa.CM3 /s
Shell Material
X-750
X-750
Contact Material
Alloy 52 Gold Plating
Alloy 52 Gold Plating
Rated Current per Pin
5A
5A
Dielectric Strength
≥5000MΩ
≥5000MΩ
Contact Resistance
≤10mΩ
≤10mΩ
Life Time
1000times
1000times
Benefits / Capabilities of Sunkye Firing Head Connector
Can re-perforate in old well without pulling the tubing out.
Can be used with big charges to achieve deeper penetration.
Firing circuitry is in short before the charges are released.
Dual Pressure random mounting side
Circulation flexibility—allowed in both directions before and after the guns are fired. Underbalanced perforating conditions are easily established.
CT compatibility—the firing head can take a combination of shear pins and can be connected to any CT string by means of a crossover connector.
Soldering mounting terminal Design efficient assembly to the equipment
Ultra-tiny design fit for the drill head solution and equipment
Assembly & Mounting Steps
Step 1: Annulus pressure from above the packer enters the crossover tool and is applied to the first (bottom) time delay firing head. The first Sunkye firing sub prevents pressure from reaching the second firing head. The time delay provides time to bleed off pressure. When the guns detonate, the firing train continues to the firing sub. The sub fires, creating a path to the second firing head. The zone is tested.
Step 2: Annulus pressure is reapplied and travels to the second time-delay firing head. The first pressure isolation sub prevents pressure from venting through the first set of perforations. The pressure is released, the gun fires and the second Select Fire sub fires and opens a path to the third gun. Production from the second zone is commingled with pressure from the first zone for testing.
Step 3: Pressure applied to the annulus passes through the annulus pressure crossover and down the control line to the third time-delay firing head. The second pressure isolation sub prevents pressure from venting through perforations in the first and second zones. The pressure is released, the guns fired, and flow from all three are commingled for testing.
If you want to know more kinds of mil spec connectors, please visit our website.
Equipping soldiers for modern missions means giving them the technological edge to succeed. To develop soldier wearables and systems, including integrating personal networks, sensors, C4 communications, and the power to manage the systems, as well as connect all the systems in a reliable and easy-to-use manner. Wearable technologies have been evolving in the most unexpected fields, according to recent studies, wearable technologies will enable soldiers to either track and be tracked in real-time and great precision – which will ensure the safety of these soldiers as well as to diminish the risk of failure in high-risked operations. In this respect, developing technologies that are discreet and can be carried along the soldier can be a life changer.
Sunkye is a custom connector corp, we provide removable wire connectors, mil spec connectors, soldier connector and etc. If you would like to learn more about how to utilize Sunkye connectors in your application, please feel free to contact us.
Crimp removable assembly a family of male cable connectors that have three rows of contacts spaced at 0.075″. These connectors come with crimp removable wire termination. They are available in sizes ranging from 11 to 80 contacts. Support high sports performance high-temperature 280℃ connector, Anti-Water & Oil the advantage of heat exhaustion resistance improve the matching performance of the whole automatic. Sports High-Performance Automobile requiring for high-temperature heat exhaustion resistance & high-performance sporting.
Sunkye is a connector manufacturing co, we provide removable wire connectors, mil spec connectors and etc. If you would like to learn more about how to utilize Sunkye connectors in your application, please feel free to contact us.
The benefit of peek single pin and Kavor alloy material with good strength and elongation as temperature increases. Each single-pin PEEK terminal connector assembly is carefully inspected to ensure electrical integrity. Insulation measurements consistently indicate 500 Giga-ohms of isolation @ 500 VDC and ambient temperature and exhibit 10,000 mOhms minimum at 2500 volts DC and temperatures as high as 260°C.
High Qualitified Performance Sealed hermetic anti chemical corrotion apply for Wellhead and subsea interconnect solution
Oil And Gas And Marine Connectors
Sunkye is a global solutions provider of innovative seal solutions and differentiated products to the global oil and gas industry. We serve a wide range of customers including oil and gas producers, original equipment manufacturers (OEMs), and engineering and service companies which utilize our technologies, products, and services for producing oil and gas from land-based and offshore platforms throughout the world. Sunkye is qualified to deliver turnkey custom solutions for a complete range of High-Pressure, High-Temperature (HPHT) applications. Our industry-leading materials knowledge, engineering design experience, and testing capabilities are key to achieving reliable service in the most extreme HPHT environments.
Application Of Oil And Gas And Marine Connectors
High Qualitified Performance Sealed hermetic anti chemical corrotion apply for wellhead and subsea interconnect solution.
What Are The Advantages Of Using Oil Connectors In Oil And Gas Industry?
With modern connector technology, the oil and gas industry can realize benefits in many fields. A more intelligent system can integrate information from all involved sensors to more accurately and timely describe whether the drilling is accurately mined, whether the involved machinery is running smoothly and whether the drilling productivity is large. It can track and maintain data, identify inefficient processes and potential safety problems, and monitor the pipeline, so that the problem can be found before it becomes worse .
Working Principles Of Optical Fiber With Oil And Gas Connectors
The intellectualization of oil and gas exploration and production makes the producers pursue the real-time information and analysis of individual oil field and drilling platform from oil field to sea or shore. Optical fiber can allow more data flow and longer edge detection distance (that is, the distance between marine facilities and sea facilities). Because the change of pressure or temperature can affect the backscatter environment, by monitoring the backscatter light source, the relevant changes can be measured accurately. In addition, the speed of the light in the fiber has been widely known, so the backscatter light can display the size of the value and its position on the whole fiber and other information.
We specialize in developing products for some of the most demanding applications, whether it’s the seabed, the bottom of the mine or the bottom of the oil well, we can provide you with premier solutions. Our mil spec connectors meet the demanding application requirements through advanced cable design and manufacturing technology.
FAQ OF OIL AND GAS AND MARINE CONNECTORS
Q.Why peek material is widely used in sealing terminal & connector application in oil & gas field?
A.The working environment of the oil gas petrochemical industry always is harshness, dirty, high pressure, extreme temperature, chemical corrosion, low PH erosion, and various different kinds of gas. Oil & Gas connectors made of peek can withstand those harsh conditions.
Q.What’s the material of oil and gas and marine connectors?
A.PEEK Material Performance.
Melts at a relatively high temperature (343 °C / 649.4 °F), benefits of physical performance with Pressure in 30,000PSI /207Mpa. Air leak: helium leak test ≤ 1×10 -3 Pa.cm 3 /s.
Sunkye is a aerospace connectors manufacturers, we provide gas industry connectors, oil industry connectors, oil industry cable connectors, mil spec connectors automotive and etc. If you would like to learn more about how to utilize Sunkye connectors in your application, please feel free to contact us.
The harsh environments submarine encounters include extreme hot and cold temperatures and extensive pressure cycling. Water is an excellent conductor of sound (much better than air), and submarines can detect and track comparatively noisy surface ships from long distances. Modern submarines are built with an emphasis on stealth and more tiny interconnect systems.
Marine grade electrical connectors used in submarine and other deep sea applications in military electronic field must bear pressure, temperature change, seawater corrosion and other impacts.
One of the worst environments that military spec electrical connectors must endure is the deep sea. So, Sunkye innovated waterproof marine electrical connectors used for diving into the deep sea must bear high pressure, while the submarine must bear constant pressure cyczale. Other tests include temperature cycling, seawater corrosion and other different types of impact.
The secondary forming of high reliability cable is also the key of underwater application. On the outboard side of the submarine, the cable assembly connected to the bulkhead connector is usually cable termination and overmolding to the plug. This kind of waterproof marine electrical connectors will bear a lot of pressure, including electrochemistry and so on.
Sunkye is a aerospace connectors manufacturers, we provide mil spec connectors, marine cable connectors, waterproof connectors marine, submarine connectors, mil micro and etc. If you would like to learn more about how to utilize Sunkye connectors in your application, please feel free to contact us.
An unmanned combat aerial vehicle (UCAV), also known as a combat drone or simply a drone, is an unmanned aerial vehicle (UAV) that usually carries aircraft ordnance such as missiles and is used for drone strikes. These drones are usually under real-time human control, with varying levels of autonomy. Especial in Military and Defense, the military standard drone meets with higher performance of the interconnect system and qualified drone connectors.
Sunkye defense cable connectors are working to help the end customer understand the complex needs and issues that affect R&D, manufacturing, the workforce, and the supply chain. The “defense series” deliver high-reliability performance in harsh-environment military, automotive, aerospace applications with high-power, high-voltage, and high-vibration requirements, including GBR, airborne radar, ship base radar, etc.
In the military / defense area, mil spec electrical connectors are invaluable for applications related to control systems, grounding systems, propulsion, weapons, and ammunition. Although almost everything today uses circuits or circuit boards, and circuits or circuit boards use connectors to link various modules, connectors play a crucial role in ensuring the reliability, robustness and performance of the system.
Application Of military radio connectors And Defense Connectors
In the field, communication relies on signal integrity to being able to make the right decisions at the right time. In addition to providing communications to support YOU’RE mission, signal disruption—such as jamming a radar signal—or outright signal prevention, military power connector can also provide great opportunity in a military exercise.
Why Choose Sunkye As Your army connectors/Defense Connectors Supplier
Most electrical and electronic systems and machinery must operate in harsh conditions exposed to natural elements. These systems must operate under extreme temperature, dust, water and air pressure changes. Because of these key requirements, architects and integrators of aerospace and defense systems must weigh many requirements and considerations when choosing the right military electrical connectors for their current work. Without proper connection of power supply and data, each system and node on the network across a wide geographical area will not be able to relay important information.
Product performance for signal-populated environments such as radar relies on phase stability to ensure the complete signal is transmitted and received intact. Sunkye’s high-quality and professionalism make it become your best choice.
Types Of Military Systems With Military/Defense Connectors
Military Standard Landing Defense Multi-Channel Complicated System of Radar: early warning radar, search alert radar, guided command radar, gun sight radar, altimetry radar, battlefield surveillance radar, airborne radar, radio altimetry radar, radar fuze, weather radar, navigation control radar, etc.
Defense connectors types includes artillery and missiles, tank and armored vehicles, helicopters, engineering equipment, etc. Including system of ships, gunboats, submarines, warships, aircraft carriers, individual systems, tanks, tanks, radars, aircraft, torpedoes, missiles, rockets, satellites, spacecraft.
Good military connector manufacturers will always strive to ensure that every service is attentive and thoughtful, Sunkye aims to be the best of them.
sunkye 